PP melt blown filter element is a tubular filter element made of odorless polypropylene particles, which are heated, melt blown, and spun to form. If the raw material is mainly polypropylene, it can become a PP melt blown filter element. Not only in large-scale use of water purification. It also has outstanding chemical compatibility, using strong acids, strong bases, and organic solvents for filtration. The molten water spray filter has strong dirt absorption ability, long service life, and low cost.
This section mainly introduces the application fields and some simple technical parameters of PP melt spray filter.

PP melt water spray filter application field:
1. Pharmaceutical industry: Pre filtration of various injections, medicinal liquids, and injection bottle washing water, as well as pre filtration of large infusion fluids, various antibiotics, and important injections.
2. Product industry: filtration of alcoholic beverages and drinking water.
3. Electronic industry: Pre filtration of pure and ultrapure water.
4. Petroleum and chemical industries: filtration of various organic solvents, acids, and alkalis, as well as filtration of oilfield water injection.
Technical parameters of PP melt water spray filter:
1. Hu’s pH value: 1-13
2. Large pressure difference: 0.4Mpa
3. Working temperature:<70 ° C at 0.25Mpa
4. Structural classification: with skeleton, without skeleton, whether end caps are added at both ends
5. Filter length: 10 “, 20″, 30 “, 40″